manualshive.com logo in svg

Comnet CWGE24MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CWGE24MS Скачать руководство пользователя страница 29

INS_CWGE24MS_REV–

02/18/13     PAGE 29

INSTALLATION AND OPERATION MANUAL 

CWGE24MS

TECH SUPPORT: 1.888.678.9427

Rate Limit

Configure the switch port rate limit for Policers and Shapers on this page.

Label

Description

Port

The logical port for the settings contained in the same row.

Policer Enabled

Enable or disable the port policer. The default value is “Disabled”.

Policer Rate

Configure the rate for the port policer. The default value is “500”. This 
value is restricted to 500-1000000 when the “Policer Unit” is “kbps,” 
and it is restricted to 1-1000 when the “Policer Unit” is “Mbps”

Policer Unit

Configure the unit of measure for the port policer rate as kbps or 
Mbps. The default value is “kbps.”

Shaper Enabled Enable or disable the port shaper. The default value is “Disabled.”
Shaper Rate

Configure the rate for the port shaper. The default value is “500.” This 
value is restricted to 500-1000000 when the “Policer Unit” is “kbps,” 
and it is restricted to 1-1000 when the “Policer Unit” is “Mbps”

Shaper Unit

Configure the unit of measure for the port shaper rate as kbps or 
Mbps. The default value is “kbps.”

Save

Select to save changes.

Reset

Select to undo any changes made locally and revert to previously 
saved values.

Содержание CWGE24MS














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды