Comnet CNGE8FX4TX4MS, Инструкция по установке и эксплуатации

Страница: 69 / 115

63
System Event Log - Event Configuration
You can select the system log events and SMTP events. When selected events occur, the
system will send out the event log information. Also, event per port log and SMTP events can
be selected. After configure, select .

System event selection: Four selections – 1) Device cold start, 2) Device warm start,
3) SNMP Authentication Failure, and 4) Topology change. Mark the checkbox to select
the events to be monitored. When selected events occur, the system will log the
event(s).

Device cold start:
when the device executes cold start action, the system will note
a log event.

Authentication Failure: when the SMTP authentication fails, the system will note a
log event.

X-ring topology change: when the X-ring topology has changed, the system will
note a log event.
Event Configuration interface