Comnet CNGE8FX4TX4MS, Инструкция по установке и эксплуатации

Страница: 104 / 115

98

Enable Coupling Ring:
To enable the coupling ring function, select the check box that
enables the coupling ring function.

Coupling port:
Assign the member port.

Control port:
Set the switch as the master switch in the coupling ring.

Enable Dual Homing:
Set up one of port on the switch to be the Dual Homing port. In
an X-Ring group, the maximum number of Dual Homing ports is one. Dual Homing only
work when the X-Ring function is enabled.
 And then, select to apply the configuration.
X-ring Interface
Note 1. When the X-Ring function is enabled, the user must disable the RSTP
first. X-Ring and RSTP function cannot be active at the same time.
2. Remember to execute the ‘Save Configuration’ action, otherwise the
new configuration will lose when switch powers off.