Comnet CNGE8FX4TX4MS, Инструкция по установке и эксплуатации

Страница: 35 / 115

29
Commands Level
The following table lists the CLI commands and description.
Modes
Access
Method
Prompt Exit Method About This Mode1
User EXEC
Begin a
session with
your switch.
switch>
Enter logout or
quit.
The user commands available at
the user level are a subset of those
available at the privileged level.
Use this mode to
• Perform basic tests.
•Displays system information.
Privileged
EXEC
Enter the
enable
command
while in user
EXEC mode.
switch#
Enter disable to
exit.
The privileged command is
advance mode
Privileged this mode to
•Displays advance function status
• Save configures
Global
Configuration
Enter the
configure
command
while in
privileged
EXEC mode.
switch
(config)#
To exit to
privileged
EXEC mode,
enter exit or
end
Use this mode to configure
parameters that apply to your
switch as a whole.
VLAN
database
Enter the vlan
database
command
while in
privileged
EXEC mode.
switch
(vlan)#
To exit to user
EXEC mode,
enter exit.
Use this mode to configure
VLAN-specific parameters.
Interface
configuration
Enter the
interface of
fast Ethernet
command
(with a
specific
interface)
while in global
configuration
mode
switch
(config-if)
#
To exit to
global
configuration
mode, enter
exit.
To exist to
privileged
EXEC mode, or
end.
Use this mode to configure
parameters for the switch and
Ethernet ports.