94
Port Base Priority
Configure the per port priority level.
Port:
each port has 4 priority levels – high, middle, low, and lowest.
Select
.
COS Configuration
Set up the COS priority level.
COS priority:
Set up the COS priority level 0~7 –high, middle, low, lowest.
Select
.
TOS Configuration
Set up the TOS priority.
TOS priority:
the system provides 0~63 TOS priority level. Each level has four types of
priority – high, middle, low, and lowest. The default value is ‘lowest’ priority for each
level. When the IP packet is received, the system will check the TOS level value in the IP
packet that has been received. For example, user set the TOS level 25 is high. The port 1
is following the TOS priority policy only. When the port 1 packet received, the system will
check the TOS value of the received IP packet. If the TOS value of received IP packet is
25(priority = high), and then the packet priority will have highest priority.
Select
.
Содержание CNGE8FX4TX4MS
Страница 6: ......
Страница 22: ...16 2 Push down the metal loop and pull the SFP out by the plastic part Pull out from the SFP receptacle...
Страница 60: ...54 Main interface Main interface...
Страница 99: ...93 QoS Configuration interface...
