Comnet CNGE8FX4TX4MS, Инструкция по установке и эксплуатации

Страница: 36 / 115

30
System Commands Set
Command Level Description Example
show config E Show switch
configuration
switch> show config
show terminal P Show console
information
switch#
show terminal
write memory P
Save user configuration
into permanent memory
(flash rom)
switch# write memory
system name
[System Name]
G Configure system name switch(config)# system name xxx
system location
[System Location]
G
Set switch system
location string
switch(config)# system location xxx
system description
[System Description]
G Set switch system
description string
switch(config)#
system description
xxx
system contact
[System Contact]
G Set switch system
contact window string
switch(config)# system contact xxx
show system-info E Show system
information
switch> show system-info
ip address
[Ip-address]
[Subnet-mask]
[Gateway]
G Configure the IP
address of switch
switch(config)#
ip address
192.168.10.1 255.255.255.0
192.168.10.254
ip dhcp G
Enable DHCP client
function of switch
switch(config)# ip dhcp
show ip P
Show IP information of
switch
switch# show ip
no ip dhcp G
Disable DHCP client
function of switch
switch(config)# no ip dhcp
reload
G
Halt and perform a cold
restart
switch(config)# reload
default G Restore to default switch(config)# default
admin username
[Username]
G Changes a login
username.
(maximum 10 words)
switch(config)# admin username
xxxxxx
admin password
[Password]
G Specifies a password
(maximum 10 words)
switch(config)#
admin password
xxxxxx