manualshive.com logo in svg

Comnet CNGE8FX4TX4MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CNGE8FX4TX4MS Скачать руководство пользователя страница 26

 

 

20

 

Hardware Installation 

 

 

This section describes how to install the CNGE8FX4TX4MS Switch and the installation steps.   
 

Installation Steps 

 

1.

 

Unpack the switch from carton. 

2.

 

Check the DIN-Rail is screwed on the Switch. If the DIN-Rail mount is not attached to 
the switch, please refer to 

DIN-Rail Mounting

 

section

 for DIN-Rail mounting 

installation. If you want to wall mount the switch, then please refer to 

Wall Mount Plate 

Mounting

 

section

 for wall mount plate installation. 

3.

 

To hang the switch on the DIN-Rail track or wall, please refer to the 

Mounting 

Installation section

. 

4.

 

Power on the switch. To wire power for the switch, please refer to the 

Wiring the Power 

Inputs section

. The power LED on the switch will illuminate. Please refer to the 

LED 

Indicators section

 for the meaning of the LED lights. 

5.

 

Prepare the twisted-pair, straight-through Category 5e (or above) cable for the Ethernet 
connection and SFP transceiver for the fiber connection. 

6.

 

Insert one side of Category 5e (or above) cables into the switch Ethernet port (RJ45 port) 
and the other side of Category 5e (or above) cables to the network device’s Ethernet 
port (RJ45 port), ex: switch, PC or Server. The UTP port (RJ45) LED on the switch will 
illuminate when the cable is connected to the network device. Please refer to the 

LED 

Indicators section

 for LED light meaning. 

 

Note  

Be sure the connected network devices support MDI/MDI-X. If it does not 

support, then use the crossover category 5e (or above) cable. 

 
7.

 

For the SFP (mini-GBIC) port, please refer to the Cabling segment. 

8.

 

When all connections are set and LED lights illuminate normal, the installation is 
complete. 

 
 

Содержание CNGE8FX4TX4MS




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды