Comnet CNGE8FX4TX4MS, Инструкция по установке и эксплуатации

Страница: 40 / 115

34
bandwidth control 2
switch(config-if)# show bandwidth
state
[Enable | Disable]
I Use the state interface
configuration command
to specify the state
mode of operation for
Ethernet ports. Use the
disable form of this
command to disable the
port.
switch(config)#
interface fastEthernet
2
switch(config-if)# state Disable
show interface
configuration
I
show interface
configuration status
switch(config)# interface fastEthernet
2
switch(config-if)# show interface
configuration
show interface status I show interface actual
status
switch(config)#
interface fastEthernet
2
switch(config-if)# show interface
status
show interface
accounting
I show interface statistic
counter
switch(config)# interface fastEthernet
2
switch(config-if)# show interface
accounting
no accounting I Clear interface
accounting information
switch(config)#
interface fastEthernet
2
switch(config-if)# no accounting
Trunk Commands Set
Command Level Description Example
aggregator priority
[1~65535]
G Set port group system
priority
switch(config)#
aggregator priority 22
aggregator activityport
[Group ID]
[Port Numbers]
G Set activity port switch(config)# aggregator
activityport 2
aggregator group
[GroupID] [Port-list]
G Assign a trunk group
with LACP active.
switch(config)# aggregator group 1
1-4 lacp workp 2