8
C365-5G-Mini User Manual CB-V1.1
www.comms365.com | 01234 865880 | [email protected]
2.6 Grounding
To ensure the safe, stable and reliable operation of the C365-4G-H685, the router casing should be
grounded properly.
2.7 Power Supply
The C365-5G-MINI can be used in difficult environments and usually the power range is very large.
So, in order to overcome troublesome environments and improve the stability of the system, the
C365-5G-MINI is designed with advanced power management technology. The DC power supply to
the device is transferred using the terminal, PIN 2(GND) and PIN 1(Vin). Please refer to the above table
for specifications of the terminal.
Normally, the C365-5G-MINI router inputs a power supply of +5
~
+40V (if your H685 support 50V, the
option is +5~+50V). In most cases, the standard configuration is 12V/1A.
2.8 LED and Check Network Status
Please connect the antenna after you successfully connect the cable. Insert the valid SIM/UIM card
and provide the power to the router via the cable. When the power is turned on the SYS LED starts to
blink after a few seconds, this means that the system start-up has been started; if the CELL LED lights
up, this means that the network is online; if the VPN light works, this means that the VPN tunnel has
been set up. Please refer to the below table as a guide for the indication lights.