Comms365 C365-5G-Mini Скачать руководство пользователя страница 58

Страница: 58 / 58

C365-5G-Mini User Manual CB-V1.1

www.comms365.com | 01234 865880 | [email protected]

•

Calculate overhead:

Decrease upload and download ratio to prevent link saturation.

•

Download speed:

Download limit in kilobits/second.

•

Upload speed:

Upload limit in kilobits/second.

Each classify section defines one group of packets and which target (i.e. bucket) this group belongs
to. All of the packets share the bucket that is specified.

•

Target:

The four default options are: priority, express, normal, low.

•

Source host:

Packets matching this source host(s) (single IP or in CIDR notation) belong to

the bucket defined in target.

•

Destination host:

Packets matching this destination host(s) (single IP or in CIDR notation)

belong to the bucket defined in the target.

•

Protocol:

Packets matching this protocol belong to the bucket defined in the target.

•

Ports:

Packets matching this, belong to the bucket defined in the target. If more than 1 port is

required, then they must be separated by a comma.

•

Number of bytes:

Packets matching this, belong to the bucket defined in the target.

Содержание C365-5G-Mini



























































Результаты поиска

Содержание C365-5G-Mini

Отзывы:

Похожие инструкции для C365-5G-Mini

Бренды по названию

Популярные бренды

Comms365 C365-5G-Mini, Руководство пользователя

Результаты поиска

Содержание C365-5G-Mini

Отзывы:

Похожие инструкции для C365-5G-Mini

Бренды по названию

Популярные бренды