Example: Programme stations 10, 12 and 2 1 within the zone designated
1”
DISPLAY
PRESS
DIAL
IO”
1 2”
“2 1
1
5
a
a
I
a
1 0
a
a
1 2
a
a
I
2
1
To check the programmed data:
PRESS
“CHECK”
C
DIAL
a
I
1
1
0
a
1
2
a
2
1
(Internal Zone
a
(Station
(Station 2
(Zone
a
Stations can be removed from a zone by pressing F- 10, entering the zone number, pressing F- 10 again and
entering the station numbers.
Example: Remove stations 12 and 2 1 from internal zone
PRESS
1 5
a
a
1 2”
a
I
1 2
(Station 12 removed)
a
I
“2
a
2 1
(Station 2 1 removed)
a
I
Note:
If you require a station to shift from one zone to another simply programme the station into the
zone as in the first example. The station will be automatically removed from its previous zone.
2.7.4.14 Priority Break-in (BREAK)
The system is provided with 3 levels of break-in to established outside or intercom calls.
Level 1:
Stations can break into busy outside line and intercom calls.
Level 2:
Stations can break into intercom calls and make a signal call to a station on an outside call.
Level 3:
Stations can send a signal call to a busy station.
To assign stations to a break-in level press the BREAK key, enter the break-in level and the assigned station
numbers. Stations not allocated to a break-in level do not have the break-in facility.
Example: Assign stations 10 and 1 1 to Break-In level 1.
PRESS
“BREAK”
0 5
DIAL
1
1
(level 1 selected)
1
10”
1
1 0
(Station
1
1 1
1
1 1
(Station 1
1
To check the programmed data:
PRESS
“CHECK”
C
“BREAK”
c o 5
DIAL
1
1
1
1
(level
1 0
1 1
61
AN-616
ISSUE 1