To check the programmed data:
DISPLAY
PRESS
“CHECK”
C
C O 6
DIAL
1
1
1
“2”
.
2
0
(line 1
(line 2
2.7.4.2
Off-Hook Signailing (F-8)
DSS key F-B is used to assign off-hook signalling to selected stations for intercom and incoming exchange
line calls.
Note:
When off-hook signalling is assigned to a station intercom camp-on and call-back facilities calls
cannot be made to that station.
To
programme, dial station number,
l
, then “0” to disable off-hook signalling, or
to enable off-hook
signalling.
Example: Assign off-hook signalling to station 10, but not to station 12.
DISPLAY
PRESS
1
3
DIAL
1
1 0
(Station
1 0
1
1 0
1
(enabled)
1 2”
1 2
1 2
1 2
0
(Station
(disabled)
To check the programmed data:
DISPLAY
PRESS
“CHECK”
C
c
1
3
DIAL
10”
1 0
(Station
1 0
1
“1 2”
1 2
(Station
1 2
0
2.7.4.3
Type of Exchange Line (F-2)
Each outside line must be defined as a local exchange or a PABX connection. This information is necessary
for redial and access barring.
Note:
For lines connected to a PABX, the code used to get an outside line (trunk access code) must be
programmed as part of the access barring data
and the PABX access pause timer set
If the line is connected to an exchange, programme “0”. If the line is connected to a PABX line, programme
1 .
55
AN-61 6
ISSUE 1