manualshive.com logo in svg

Commander AN 616, Руководство пользователя, Страница: 16 / 128

Поделиться
Скачать
Commander AN 616 Скачать руководство пользователя страница 16

Outside Call Conference

Two stations and one outside party can take part in a conference.

To 

set up the conference:

ask the outside party to wait
press the AD.ON key. The line lamp flickers
call the second station via intercom using the special ring facility
the called party answers by lifting the handset and pressing the ICM key

press the AD.ON key. A triple burst of tone is heard.

The conference is then established.

If the intercom call is not answered press the AD.ON key to return to your caller.

Simultaneous Outside Line Calls

Two outside line calls can be conducted simultaneously at a station.

The second call is established as follows:

ask your first party to wait
press the 

 key. The line lamp flickers

place the second outside call
press the AD.ON key. A triple burst of tone is heard

The conference is then established.

To redial the number if the second party is busy or does not answer

press the first party’s LINE key
press the second line key again and redial on receipt of dial tone

To return to your first party if the second party is unavailable

press the first party’s LINE key
press the AD.ON key

Either party can be released from the connection by pressing the line key of the 

incompleted 

call.

Three Station Conference

call the first station and ensure that the called party answers using the handset
press the AD.ON key
listen for internal dial tone
call the second station and ensure that the called party answers using the handset

press the AD.ON key. A single burst of tone is heard.

The conference is then established

If any party replaces the handset the call can continue between the remaining parties.

 Meet-me Conference

After making an all call or internal zone paging announcement for the called parties to “Add On”

press 

 key and wait, with the handset off hook, for the called parties to respond

To respond to the meet-me conference call

lift the handset

press AD.ON key

 Room Monitor

The monitoring of sound in the vicinity of any On Hook station is set up as follows:

At the station to be monitored

lift the handset
press the MON key, the lamp shows a double flash
replace the handset

At the station monitoring the sound

press the MON key, the lamp flickers

Outside calls and intercom calls can still be made. However, Room Monitoring will be automatically
suspended during the progress of a call and will resume when the call is completed.

Repeat the above procedures to cancel room monitor.

14

AN-61 6

ISSUE 

Содержание AN 616

































































































































Отзывы:

Нет отзывов