manualshive.com logo in svg

Commander AN 616, Руководство пользователя, Страница: 19 / 128

Поделиться
Скачать
Commander AN 616 Скачать руководство пользователя страница 19

Clock Setting

If station 10 is a handsfree station, the time, date, year and day may be set as follows:

Enter the clock set mode by going off-hook and pressing the SET key.

To set time

press clock key once
dial 

l 

for AM or # for PM

dial the time (four digits), e.g. 9 o’clock   0900
dial 

To set date

press clock key twice
dial the date (four digits), e.g. 2 1 st June   062 1
dial 

To set year

press clock key three times
dial the year (four digits), e.g. 1986
dial 

To set day

press clock key four times
dial day of week   digit) 0 Sunday   6 Saturday
dial 

Leave the clock set mode by pressing the SET key and replacing handset.

Handsfree Operation

To use the station in the handsfree mode press the SPKR key with the handset on hook. To terminate the
call press the SPKR key again.

Lift the handset to change from handsfree mode to normal conversation.

If you wish to disable the microphone during a handsfree conversation press the MIC key. To enable the
microphone press the MIC key again.

Message Waiting Check

If the MW lamp is indicating that there is a message waiting, press MW key to display the originating
station number. If more than one message has been left, repeated pressing of the MW key will show the
numbers of the stations that have left messages.

If you are engaged on an outside call and an intercom call arrives, press the MW key and the calling station
number will be displayed.

NOTE:

The number will not be shown if the display is in the timer mode.

Repertory Dial Check 

(see 1.3.6.1 for storing numbers for Repertory dialling)

To display the numbers stored for repertory dialling

With the handset on-hook

press the CHECK key
press the required   

 key. The stored number will be displayed.

If the number exceeds 1 1 digits, press the 

l 

key to display the remaining digits.

Abbreviated Dial Check

To display numbers which have been stored for abbreviated code dialling

With the handset on-hook

press the CHECK key
dial the abbreviated code   O-69). The stored number will be displayed.

If the number exceeds 1 1 digits, press the 

l 

key to display the remaining digits.

Brightness Control

The brightness of the display can be changed by pressing the 

 key to one of the three levels.

Battery Low Alarm

 will flash slowly on the display at all handsfree stations to indicate battery low condition. If this

occurs, call Service Difficulties on 1 100 immediately.

17

AN-61 6

ISSUE 

Содержание AN 616

































































































































Отзывы:

Нет отзывов