manualshive.com logo in svg

Commander AN 616, Руководство пользователя, Страница: 20 / 128

Поделиться
Скачать
Commander AN 616 Скачать руководство пользователя страница 20

1.3.8.2

Standard Telephone Station

Intercom calls

Making an Intercom Call

lift the handset, listen for dial tone
dial the required station number
speak after hearing a single burst of tone

If a double burst of tone is heard the called station has the microphone switched off. Remind the
called party to switch the microphone on to reply.

If a slow repeating tone is heard, then a continuing ring signal is being sent to the called station.

Busy tone means the party is engaged on another call.

A repeating double tone means the station is in the “Do Not Disturb” mode (1.3.7.1 

Intercom Camp On

If busy tone is heard when making intercom calls

dial 1.

Provided you remain off hook, the intercom call will be automatically established when the called station is

free.

NOTE:

This feature is not provided if the called station is programmed for off hook signalling.

Intercom Call Back

If busy tone is heard when making intercom calls

dial 1

replace the handset.

When the called station is free your station will ring.

lift the handset and the intercom calls will be automatically established.

NOTES:

If the call back is not answered within 20 seconds the call is cancelled.

This feature is not provided if the called station is programmed for off-hook signalling.

Incoming Intercom Calls

Simply lift handset to answer.

Three Station Conference

call the first station and ensure the called party answers using the handset
quickly depress and release the switchhooks
listen for special facility tone
call the second station and ensure the called party answers using the handset

quickly depress and release the switchhooks, a single burst of tone is heard.

The conference is then established.

Outside Calls

Outgoing

lift the handset, listen for dial tone
dial 0 to connect to any free line
listen for outside dial tone, then dial the wanted number.

To seize a line from a particular group dial 9 instead of 0, then the group number l-6.

If an exclusive line is assigned dial 0 to seize the exclusive line.

Outside Line Request

If all outside lines in your group are busy, you may request the next free line, when busy tone is heard.

dial the line group number 1-6

3 bursts of tone will be heard
replace the handset.

When a line in your group becomes free, your station will ring

lift the handset, outside dial tone will be heard.

NOTE:

If the call is not answered within 20 seconds the request will be automatically cancelled.

Incoming Calls

Simply lift the handset to answer an incoming call signalled at your station.

18

AN-61 6

ISSUE 1

Содержание AN 616

































































































































Отзывы:

Нет отзывов