Comet M1200E, Инструкция по эксплуатации

Страница: 8 / 50

8
IE-MLG-M1200E-01
Multilogger in stationary application

Select a suitable location for placing of the Multilogger - pay attention
to parameters of ambient environment, minimize the number of cables,
avoid sources of interferences. For more information, see Chapter
“INSTALLATION INSTRUCTIONS”
.

Mounting of sensors and routing of cables - pay attention to rules of
theirs installation, use recommended working positions, keep enough
distance from high power devices and cables.

Connect the appropriate probes and signals to the device - for more
information, see Chapter
“INPUTS OF MULTILOGGER”
.

Switch on the Multilogger - push the switch button on the device. The
display lights and the instrument starts working. For more information, see
Chapter
“POWER SUPPLY OF MULTILOGGER”.

Install the COMET Vision software to your computer - it is available at
www.cometsystem.com . If you purchased a license for the extended SW,
register it.

Connect Multilogger with your PC - for more information, see Chapter
“CONNECTING WITH THE COMPUTER”.

Device settings - use COMET Vision software to set up the device in
accordance with the connected probes and your requirements. For more
information, see Chapter
“DEVICE SETUP USING SOFTWARE”.

Maintenance and periodic inspections - In order to secure reliable
operation of the device, it is recommended to make regular checks. For
more information, see part “OPERATION AND MAINTENANCE
RECOMMENDATIONS”.