Comet M1200E Скачать руководство пользователя страница 21

Страница: 21 / 50

IE-MLG-M1200E-01

c) Real time clock circuit state:

tick

- OK,

exclamation mark

- low voltage of the real time clock circuit detected, the time
could be incorrect!

d) Activities of the Alarm out signal:

is not supported.

e) MUTE activated:

tick

- was activated (alarm is still active),

field without a tick

- was not activated (or the alarm is

inactive).

f) Activities of EN signal:

is not supported.

g) battery voltage: range from 3.4 V (completely discharged

battery) to 4.5 V (new or just charged battery)

h) device internal temperature (affects the battery charging)

i) cold junction temperature of the thermocouples

j) Multilogger firmware version.

2. Viewing settings

_______________________________

Allows to view the following settings:



record settings

(recording interval, cyclic record, record on alarm,

record of the average and min/max values per logging interval)



general settings

(LCD backlight intensity, battery type, menu

language, date and time in the device)



alarm limits

(limit values, hysteresis and delay for each existing

channel and alarm. You can change channels using the arrow
keys).



alarms indication

- information about settings of alarm

signalization (optical, audio, Alarm Out signal) and if it is enabled to
temporarily deactivate the alarm signalization (MUTE function)



memory occupation

- information about alarm limit of data memory

occupation and signalization of this alarm (optical, audio, Alarm out
signal)



Ethernet interface

–

is not supported

Содержание M1200E



















































Результаты поиска

Содержание M1200E

Отзывы:

Похожие инструкции для M1200E

Бренды по названию

Популярные бренды

Comet M1200E, Инструкция по эксплуатации

Результаты поиска

Содержание M1200E

Отзывы:

Похожие инструкции для M1200E

Бренды по названию

Популярные бренды