Comet M1200E, Инструкция по эксплуатации

Страница: 18 / 50

18
IE-MLG-M1200E-01
Basic display operation
Current measured values (or min/max) and their units are shown on the
device display. To make it easier, the short description of measured quantity,
the corresponding input number or a user description of the input, can be
optionally displayed. Using the VIEW multifunction key, you can switch
among these views on the display. You can choose from 3 different display
options: input short description of measured quantity, input number
without the short description of measured quantity and channel number +
short description of measured quantity. If the Multilogger setup allows it,
audio signaling of the currently active alarms can be temporarily muted using
the MUTE multifunction key.
Numerical values of the measured quantities can be optionally displayed in
three different font sizes according to user needs. When the smallest font
size is selected, up to 6 quantities can be displayed together. When the
largest font size is selected, the maximum number of the quantities that can
be displayed together is 2. The maximum range of numerical values on the
display is 7 characters (including the decimal point and sign "minus").
Exceeding this range is indicated as several dashes (------), recording,
however, is still running correctly.
When the Multilogger is set for measuring more quantities or calculated
channels, their viewing can be cyclically switched using the multifunction
CHANN key. The order of the displayed quantities can be modified as
needed.
The bell icon on the line of the measured value indicates an active alarm for
this quantity.
The status line of the display shows icons that indicate the current status or
device mode:
full memory of non-cyclic record
active recording