Comet M1200E, Инструкция по эксплуатации

Страница: 7 / 50

IE-MLG-M1200E-01
7
Getting started
Multilogger in portable application

Connect the appropriate probes and signals to the device - for more
information, see Chapter
“INPUTS OF MULTILOGGER”
.

Switch on the Multilogger - push the switch button on the device. The
display lights and the instrument starts working. For more information, see
Chapter
“POWER SUPPLY OF MULTILOGGER”.

Install Comet Vision software to your computer - it is available at
www.cometsystem.com . If you purchased a license for full version,
register it.

Connect Multilogger with your PC - for more information, see Chapter
“CONNECTING WITH THE COMPUTER”.

Device settings - use SW to set up the device in accordance with the
connected probes and your requirements. If you are not going to use the
device soon, turn it off. For more information, see Chapter
“DEVICE
SETUP USING SOFTWARE
”.

Measurements - remove the Multilogger from the transportation case,
connect probes and external power adapter (if needed) and turn the
device on. Some device settings can be changed from its keyboard. When
measurement ends, move the device to your computer room and
download the recorded data to PC. For more information, see Chapter
“KEYBOARD OPERATION”.

Charging batteries - if the Multilogger includes rechargeable batteries,
you can recharge them when needed. For more information, see also
Chapter
“POWER SUPPLY OF MULTILOGGER”.

Maintenance and periodic inspections - In order to secure reliable
operation of the device, it is recommended to make regular inspections.
For more information, see part “OPERATION AND MAINTENANCE
RECOMMENDATIONS”.