Comet Labs NFPS2, Руководство пользователя

Страница: 5 / 93

Chapter1 Introduction
Thank you for purchasing this Comet Labs NFPS2 / WFPS2 USB MFP Server (in the
following referred to as “Server”). This Server is designed to connect your AIO/MFPs
(All-In-One/Multifunction Peripheral), printers, USB mass storages (hard drives, flash
drives, and memory card readers), and scanners, to your network, allowing all
network users access to these shared USB devices resources.
1.1 About this Manual
This manual provides introductory information as well as detailed instructions on how
to set up and manage Comet Labs NFPS2 and WFPS2 in various network
environments. Compared with NFPS2, WFPS2 has an additional wireless module
(802.11b/g). Except for the wireless-related configuration and operations, all other
configuration and operations are almost the same for NFPS2 and WFPS2. Unless
explicitly specified, all instructions apply to both NFPS2 and WFPS2.
To fully benefit from this document, you should be familiar with basic networking
principles. The instructions described in this manual are based on the settings in a new
Server. To reload the Factory Parameters, you can reset this Server back to Factory
Default, which will restore most of the settings. For details, please refer to the chapter
“Restore Factory Defaults”.
1.2 Customer Support
Should you require any technical assistance, please contact your product reseller. Or
you can visit our website at
http://www.cometlabs.com for latest product information.
This document is subject to changes without prior notice.
5