19
Fixing holes
Elastic closure clips
Position of silicone tamper
Anti-tear tamper hole
Cable routing
RFID proximity reader on bus (art. 30006104)
The RFID proximity reader on bus allows activation and deactivation with RFID keys without contact. An RFID key can be associated to each
user. Each key can operate on the zones and areas for which the associated user is enabled.
Its mechanical con
fi
guration is such that it can be used directly on all residential series that use an adapter for Keystone standard RJ45 network
connector. It is compatible with Comelit RFID keys.
Main features:
•
Simpli
fi
ed mounting with Keystone generic RJ45 adapter on residential series frames
•
Four LEDs with partially assignable functions.
•
Possibility of quick total activation
•
Choice of several activation modes
•
Physical addressing of device by means of DIP switches
Meaning of LEDs
The reader has 4 indicator LEDs, the meaning of which varies according to reader status:
t
reader in standby (no cycle in progress):
LEDs show the operating status of the areas enabled for the reader
t
cycle in progress:
the LEDs light up in sequence to provide users with an indication of which scenarios are available, allowing them to make
a choice.
The cycle actions associated with the LEDs by default are:
t
Red LED:
Total activation
t
Yellow LED:
Scenario P1
t
Blue LED:
Scenario P2
t
Green LED:
Scenario P1+P2
IMPORTANT
: The actions associated with the LEDs can be changed by the installer during system programming.
The table below lists the meanings of the LEDs while the reader is in standby.
Colour
Description
Red
On
Scenario associated with the Red LED active
Slow
fl
ash
System not activated and alarm, sabotage or fault event memory present
Fast
fl
ash
System activated and alarm, sabotage or fault event memory present
Blue
On
Scenario associated with the Blue LED active
Slow
fl
ash
System activated with unknown scenario (not saved)
Yellow
On
Scenario associated with the Yellow LED active
Fast
fl
ash
Fault present
Green
On
Scenario associated with the Green LED active
Fast
fl
ash
System not ready for enabling or there are (non-excluded) open zones
The meaning of the LEDs during the selection cycle depends on system con
fi
guration.
As a general rule, consider the following:
• LED steadily lit: the action can be performed without forcing.
• LED
fl
ashing quickly: the action requires forcing (the system is not ready).
Meaning of activator LEDs during presentation of the key
RED
YELLOW
BLUE
GREEN
OFF
Request for deactivation of all areas covered by the reader.
ON
Request for activation of the activation
pro
fi
le associated with the RED LED
Request for activation of the activation
pro
fi
le associated with the YELLOW
LED
Request for activation of the activation
pro
fi
le associated with the BLUE LED
Request for activation of the activation
pro
fi
le associated with the GREEN
LED
Flashing quickly:
The reader is forcing the activation
pro
fi
le associated with the RED LED
(*)
The reader is forcing the activation
pro
fi
le associated with the YELLOW
LED (*)
The reader is forcing the activation
pro
fi
le associated with the BLUE LED
(*)
The reader is forcing the activation
pro
fi
le associated with the GREEN
LED (*)
(*) The purpose of forcing is to overcome a ‘not ready’ condition in one or more of the zones associated with the areas covered by the reader,
and/or an anomaly which can be overridden due to the choices made at the time of control panel con
fi
guration.
