12
Fitting the GSM module
√
First check that all power is OFF.
Insert the plastic spacers in the predisposed holes. Then, taking care to plug the module connector into the switchboard connector designated
MOD5 correctly, apply suf
fi
cient pressure to engage the spacers in the GSM expansion card and plug the connector in almost completely.
Once you have
fi
tted the module correctly, connect the antenna to the respective connector.
IMPORTANT
: if the position of the switchboard does not allow the reception of an adequate GSM signal to ensure a good connection, it is
possible, for example, to use an external antenna mounted vertically on the housing. Alternatively, you can move the antenna by using an
extension cable. For this purpose, there is a pre-marked section to allow easy exit of the antenna cable.
1
3
2
GSM communication expansion module (art. 30001301)
