EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR
RF-9122T18 QE
Copyright - refer to title page
Page 51
ENU Status : 1-0-0
OMT installation
a) Copy installation programs. Create a new folder on the hard disk and name it (for instance ‘OMT
V1.04). Then copy all the files on installation disk to the newly created.
b) Double click the ‘SETUP.EXE” logo, then the program will start the set up and the following
window will appear;
c) Follow the ongoing screenshots until a message confirming installation is complete pops up. This
completes the installation of OMT.
OMT un-installation
To uninstall OMT from the PC, follow the steps:
a) Select: “START” -> “Settings” -> “Control Panel”
b) Select “Add/Remove Programs” -> “OMT Software V1.04” -> “Add/Remove (R)…”
c) A pop-up message will appear during the un-installation process, select “Yes
（
Y
）
”
d) When the removal-completed message box appears, select “OK” to complete the un-installation.
End of section
