EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR
RF-9122T18 QE
Copyright - refer to title page
Page 36
ENU Status : 1-0-0
OMT will automatically distinguish between the master-unit or remote-unit display on the
configuration window. (The figure below shows remote unit is as sample.)
For remote connection, selecting ‘online’ should bring up the main-window shown above.
In the event of connection failure, a connection prompt will appear on the screen, proceed to verify
the following and re-try the connection:
z
Check the power connection
z
Check serial port selection
z
Check speed setting for the port
z
Check whether the mains voltage is normal, and whether the repeater is switched on.
z
Check whether the site ID is correct.
