EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR
RF-9122T18 QE
Copyright - refer to title page
Page 50
ENU Status : 1-0-0
7.3 APPENDIX C: OMT INSTALLATION
Operation and Maintenance Terminal (OMT) is windows-based software designed for the control
and maintenance of Comba repeaters. Installed in a PC, it performs the operation on the repeater
either by local connection via RS-232 cable or remote connection via line/ wireless modem.
Main Functions in OMT:
z
To configure and adjust the repeater’s operating parameters
z
To check the repeater’s operating status
z
To configure and detect the software network parameters
z
To download firmware
Environment for OMT operation
Before installation of OMT, ensure the following requirements for running OMT software are met.
a) Minimal Hardware Requirements:
z
CPU : Pentium 2 processor at 300MHz
z
RAM
：
128MB
z
HDD
：
2GB MB
z
VGA
：
14 inch, with 800×600 resolution
z
Factory supplied serial cable (labeled "9122”)
z
Modem (either type may be used)
z
Wireline modem: 56K modem, RJ11.
z
Wireless modem : GSM wireless modem, SIM card supporting datalink and SMS
functions, optional antenna for wireless modem
b) Operating System (OS) Requirements:
English version of the following OS has been tested:
•
Win98
SE
•
Win
Me
•
Windows NT Workstation / Windows NT Server
•
Windows 2000 Professional with SP1, SP2, SP3, SP4
•
Windows 2000 Server Edition with SP1, SP2, SP3
•
Windows XP Professional with SP1
Our recommendation is: Windows 2000 Professional with SP3 or SP4.
