ComAp InteliVision 8 Скачать руководство пользователя страница 75

Страница: 75 / 96

InteliVision 8

The following table shows the occupancy particular pins relating to communication ports in the connector.

PIN nr.

Description

RS485A

RS COM

RS485B

CAN2H

CAN2-COM

CAN2L

Image 9.8 Description of pins of ID-Mobile relating to communication with InteliVision

Note:

Only 2 InteliVisions 8 can be installed to CAN2 with using one ID-Mobile.

Note:

Only 1 InteliVision 8 can be installed on RS485.

9.4 Modules’ address combination on CAN

(IG/IS-NT, ID)

The following CAN addresses are used for modules connected to CAN2 (intercontroller CAN bus). There

cannot be

more modules using the

same address

connected at the same time, if they would be there,

communication failure

all of modules with the same CAN address appears.

CAN address can be changed using jumpers, configuration program or from the display - refer to the

corresponding chapter or reference guide for detailed description.

Real

CAN2

Address

IG-MU

I-LB

(modem)

I-LB+

IG-IB

(IBConfig <1,5)

IG-IB

(IBConfig >1,6)

IV 8

I-RD-

CAN

122

addr. 2

addr. 4

123

addr. 2

addr. 1

addr. 2

124

addr. 1

addr. 2

addr. 1

125

modem

addr. 1

addr. 3

Image 9.9 CAN2 Address occupation

Note:

Please note that USB port is using its CAN address only if an external device is connected to the USB

port of I-LB+. Make sure that other device (e.g. IG-IB) is not using the same CAN address as USB port of an I-

LB+, because using USB port could interrupt CAN communication.

Note:

Please note that addresses 1 and 2 (123, 124) are exchanged in versions IBConfig ≤ 1.5 and IBConfig ≥

1.6

see Modules’ address combination on CAN (IG/IS-NT, ID) on page 75

Note:

ID-Mobile and ID-DCU industrial support only 2 InteliVisions on CAN2

Note:

There can be up to 5 I-RD-CAN displays on CAN2 bus. The fifth for I-RD-CAN has Addr. 5 and this

address corresponds to real CAN2 address 121.

Содержание InteliVision 8

































































































Результаты поиска

Содержание InteliVision 8

Отзывы:

Бренды по названию

Популярные бренды

ComAp InteliVision 8, Руководство пользователя

Результаты поиска

Содержание InteliVision 8

Отзывы:

Бренды по названию

Популярные бренды