ComAp intelilite nt amf20, Справочное руководство

Страница: 14 / 145

InteliLite
NT
– AMF20/25, SW version 2.2, ©ComAp – September 2014 14
IL-NT-AMF-2.2-Reference Guide.pdf
Use Ethernet UTP cable with RJ45 connector for connection of the module into your ethernet network.
The module can be also connected directly to a PC using cross-wired UTP cable.
Hint:
The controller is able to detect IB-Lite and performs automatic configuration. Related setpoints COM1
Mode , COM2 Mode and ModbusComSpeed remain unchanged. This applies to firmware versions 2.2
or higher.
Modbus TCP protocol using IB-Lite communication module requires setting
COM1 Mode = DIRECT
and COM2 Mode = MODBUS.
Connection to LiteEdit via IP address is not possible if AirGate function is enabled. In this case use
AirGate connection. If you require connection usin
g IP address, kindly disable setpoint “Airgate
[ENABLE, DISABLE]”.
For details see newest version of IB-Lite Reference Guide.
IL-NT-GPRS GSM and GPRS plug-in modem
This plug-in module is a GSM/GPRS modem which can work in two modes of operation based on the
settings in the setpoint COM1 Mode.

Settings DIRECT = the module works in a GPRS network and enables connection via AirGate
to
LiteEdit and WebSupervisor as well as sending SMS alarms.

Settings MODEM = the module works as a standard GSM modem enabling a CSD (Circuit
Switch Data) connection to the controller with
LiteEdit or InteliMonitor and sending SMS
alarms.
IL-NT GPRS
MODULE AND
GSM/GPRS
SCREEN ON
IC-NT
DISPLAY
The communication module IL-NT GPRS works with:

WebSupervisor
– internet-based remote monitoring solution

AirGate
– powerful connection technology to make internet access as simple as possible