InteliLite
NT
– MRS3,4, AMF8,9, SW version 1.4, ©ComAp – October 2008 6
IL-NT-MRS3,4-AMF8,9-1.4-Reference Guide.pdf
General Description
Description of the controller system (with all options)
InteliLite
NT
MRS3/4, AMF8/9 is a comprehensive AMF-controller for single generating sets and sets
operating in stand-by mode. IL-NT AMF9 features extended support of electronic engines.
InteliLite
NT
controllers are equipped with a powerful graphic display showing icons, symbols and bar-
graphs for intuitive operation, which sets, together with high functionality, new standards in Gen-set
controls.
InteliLite
NT
automatically starts the Gen-set, closes the Gen-set C.B. when all conditions are met, then
stops the engine on external signal or by pressing push buttons.
Gen-set C.B. is controlled by binary output but works without feedback signal. Mains C.B. works
similary.
InteliLite
NT
provides gas engine support without ventilation.
The key feature of InteliLite
NT
is its easy-to-use operation and installation. Predefined configurations
for typical applications are available as well as user-defined configurations for special applications.
Software and Hardware Compatibility
It is possible to use HW from higher type of controller for SW of lower type of controller. The table
below describes software and hardware compatibility.
Software
Compatible Hardware
IL-NT MRS3
IL-NT MRS10
IL-NT MRS4
IL-NT MRS15
IL-NT AMF8
IL-NT AMF20
all IL-NT AMF/MRS
IL-NT AMF25
What is in the package?
Accessories
Description
Optional / Obligatory
IL-NT AMF/MRS
InteliLite
NT
central unit
Obligatory
IL-NT-RS232
RS232 communication card
Optional
IL-NT-RS232-485
RS232 and RS485 communication card Optional
IL-NT-S-USB
S-USB service USB card
Optional
IL-NT AOUT8
Gauge driver card
Optional
**IL-NT RD
Remote display software
Optional
AT -LINK-CONV
Service programming RS232 interface
Optional
**Remote display for IL-NT controllers uses standard IL-NT controller with Remote
display software.
Extension modules
IGL-RA15 - Remote annunciator and IG-IOM/PTM - I/O extension module are
not supported in IL-NT MRS3/4 and IL-NT AMF8/9.
Hint:
For detailed information about extension modules used with IL-NT controllers, please see the IL-NT-
Accessory Modules manual.
