InteliLite
NT
– MRS3,4, AMF8,9, SW version 1.4, ©ComAp – October 2008 58
IL-NT-MRS3,4-AMF8,9-1.4-Reference Guide.pdf
bps.
unction description
ADVANTECH – ADAM 4520: RS232 to RS422/485 converter, DIN rail, automatic RS485 bus
control signals, galvanic isolated, baud rate 38400 or 56000
supervision, no external data flow
Any connected RS 232 to RS 422/485 converter has to be set to passive DSR signal (when DSR
onnected) after switch on.
c
F
Remote display IL-NT-RD works as
Lite controller. It is supposed and
remote display and control of the master InteliLite-NT or InteliDrive
highly recommended that both, remote display and master are using
as no effect to the master
e
remote display shows it’s Init screen and message “Trying” and all LED’s are off.
inking.
ed
s by pressing PAGE button for 3 seconds.
W compatibility
the same HW type and model of controller. Another types and models of master and remote display
are not supported nor tested. All remote display’s LEDs shows the same state as corresponding LEDs
on master controller. Front panel buttons on both controllers work in the same way. Genset/Engine
can be controlled from remote display as well as from master controller. User can switch screens, set
password, change setpoints and view history records.
All IL-NT-RD screens Init, Measure, Setpoints and History display the same data like in the master
ontroller.
c
Master device is always able to work without connected Remote display.
Interruption of the serial line between master device and Remote display h
ontroller.
c
If the serial line between master device and remote display is interrupted, or communication cannot b
stablished,
e
Once remote display finds compatible master it shows “Preparing” and downloads configuration table
rom master controller.
f
After the configuration from master is downloaded remote display jump to master controllers Init
creen and all LEDs and bl
s
It is possible to switch to remote displays Init screen to check it’s version and serial number of us
ontroller and communication statu
c
S
IL-NT-RD sw. version 1.0 is compatible with masters SW:
the IL-NT-RD software.
•
All InteliLite-NT standard software from ver. 1.1
All ID-Lite standard software from ver. 1.0
•
•
Chosen IL-NT and ID-Lite customer branches
Some of the future IL-NT, ID-Lite versions may require upgrade of
