Colorjet VerveLED VLR 2513, Инструкция по установке и устранению неисправностей

Страница: 46 / 49

Page | 45 Verve LED
6. “Print Stops In Between Printing”
Problematic Parts Reasons Correction Steps
1. USB Cable Cable is loose
Cable is faulty Tighten the USB cable
Replace it, if faulty
4. File Size File size exceeded the limit Use compatible and small size
images for printing
5. Ground Wire
Ground wire is disconnected Connect the ground wire to the
system
6. Encoder Scale Encoder scale is having ink stains Cleaned the Encoder Scale
Check and Replace Encoder
Scale, if faulty
7. Ripped File Ripped file is having error Carefully read the error and
resolve it
7. “Print Margin Is Shifting Or Junk Printing”
Problematic Parts Reasons Correction Steps
1. Encoder Scale Encoder Scale is having ink stains Clean the Encoder Scale
2. Encoder Sensor Encoder Sensor is not clean Clean the Encoder Sensor
3. Pulley or Belt Pulley or belt is slipping
Check and replace it, if required
4. Data Cable Data cable is faulty Replace the Data Cable
8. “Print Is Blur (Not Sharp)”
Problematic Parts Reasons Correction Steps
1. Print Head Improper head alignment Correctly Align the Print Heads
(Refer to the Head Alignment
section)
2. Ink Recommended ink is not used
Ink is stored at unfavorable
environment
Only use the recommended ink
Ink is stored at favorable
environment