Colorjet VerveLED VLR 2513, Инструкция по установке и устранению неисправностей

Страница: 21 / 49

Page | 20 Verve LED
Step 11: Press the Detect Media Height button to sense the media height, as shown below:
Fig 18: Setting Head Height
Step 12: Lift the carriage up by pressing the Lifter Back Zero b utton on the Carriage Lifter tab under the
Maintenance menu (Refer to Fig 18).
Step 13: Bring down the carriage by pressing the Lifter Move to Print Height button (Refer to Fig 18).
Step 14: Run the full (2500/1300 MM) dry print command (without Ink and Head) to verify the functioning
of the printer like XYZ axis, sensors, Limit Switch, etc.
Now, printer is ready for printing.