Colorjet VerveLED VLR 2513, Инструкция по установке и устранению неисправностей

Страница: 40 / 49

Page | 39 Verve LED
Firstly, check if Cyan(C) has 0 fed in its input field, make it zero before performing color offset (left right).
Print color offset
for ‘ left to right ’ selecting a spee d. Observe the correct matching values and feed in the
input field for each color. Mostly same values have to be entered in PH1(R) and PH1(L). Repeat the same
for ‘Right to Left’. The Color Offset Calibration for Cyan is shown in the image below:
Fig 47: Displaying the Color Offset for Cyan Color
Perform the above step for all 3 speeds.
Bi Dir offset
Click to print patterns in all three speeds and feed separately in all 3 sections (Refer to Fig 46).
Fig 48: Displaying the Bi-Dir Offset
Now, the Calibration is complete.