Page
70
of
73
VastraJet K2
PRINT NOT DRYING/INK MARKS ON BACK OF THE FABRIC
•
Print dryer is not ON or not working.
•
Dryer temperature is not sufficient.
•
Coating of fabric is not correct.
•
Fabric supporting bar and take up roller is stained with ink.
INK NOT FILLING
•
Main tank is empty.
•
Ink pipe is having cut/bend.
•
Ink pump is not working/connector loose/open.
•
Sub tank float connector is loosely connected to the headboard.
•
Sub tank float is not working.
FABRIC NOT PEELING OFF
•
Takeup Motor power is not ON.
•
Dancing bar weight is less.
•
Core is slipping and not intact with air shaft.
•
Fabric is not stick to the core.
IMPRESSION OF INK ON PLAIN FABRIC
•
Belt is not washed properly.
•
Water in the tank is dirty and have fabric lints.
•
Fabric threads are stick over the belt.
•
Brush is congested with fabric threads and not uprooting the threads from the belt.
•
Press roller is having ink stains.
PRINTER MANAGER
NOT SHOWING “READY”
•
USB is disconnected from computer or loosely connected.
•
Print engine is OFF.
•
Main board is faulty.
•
USB cable is faulty.
PRINT STOPS IN BETWEEN PRINTING
•
USB cable is loose / faulty.
•
Image files are heavy in size.
•
Ground wire is disconnected.
•
Encoder strip is having ink stains/scratches.
•
Ripped file is having error.
