Page
65
of
73
VastraJet K2
GLUE COATING LAYER
•
It is strictly recommended that the company suggested glue has to be used, otherwise it may cause damage
to the sponge rollers, conveyor belt, brush motor assembly, and belt motor coupling.
•
Glue coating has to be checked from time to time for its adhesive strength. Whenever required, fresh
coating is to be done.
Precautions:
•
If the glue layers are peeling off partly, it may harm the print head and also results in the printing wastage.
•
If glue adhesion goes less, it can damage the print head as the fabric gets entangled with the Print Head
during printing.
ENVIRONMENTAL MAINTENANCE
•
Room temperature should be maintained in 24
O
C + 4 with humidity 65%RH + 10%
•
Closed dirt-free room exclusive for Printer
•
Proper cool with white lightings
DAILY MAINTENANCE
•
Renewal of water is done every 4 hours in the water tank, as per the use.
•
Keep the capping area clean, particularly before capping.
•
Run the wash cycle after finishing each fabric roll and also remove the fabric thread, if any.
•
Clean the purging tray daily.
•
Maintain the recommended air pressure.
•
Belt shifting should regularly be monitored and adjusted, if required.
•
Press roller and fabric guiding rollers should be wiped daily to remove the ink stains.
WEEKLY MAINTENANCE
Washing Tub Maintenance
Washing tub is an integral part of the printer. Its maintenance is equally important as the production job work. The
timely maintenance increases overall productivity by minimizing the downtime of machine and increases the life of
the tub related parts.
•
Whole tub unit should be cleaned thoroughly.
•
Water tank, jetting pipes, brush roller and refreshing tank water should be cleaned frequently to prevent
from fabric threads, mold or algae choking the water flow in the tub, and its related parts.
Precautions:
•
Don’t run the
wash cycle while jetting pump is OFF.
•
Don’t run the
wash cycle until the glue gets dry (after glue coating, wait for 3 or 4 hours).
•
Always use the clean water (50-150 rpm) for the washing system.
•
Don’t forget to clamp the water pipes before starting the
wash cycle.
