Page
54
of
73
VastraJet K2
Glue Coating Procedure
Note
: Extreme care to be taken during the glue process, any negligence may render the coat unsuitable for use, and
complete process may be required to be repeated. At least 3 persons will be required for this process.
Follow these steps to start the glue coating process:
Step 1:
Before starting the glue coating, make sure that tub is out. In case tub is not out, touch the TUB IN icon on
the WASHING SYSTEM screen to tub out, as shown below:
Step 2:
Place the Glue Applicator unit on the given studs in the front of the machine, as shown below:
Fig 70: Placing the Glue Applicator Unit
Right
Left
Click TUB IN
On clicking TUB IN, the WASHING SYSTEM
screen with TUB OUT option appears
