Page
41
of
73
VastraJet K2
Step 3:
Click on the
=>
icon (Refer to Fig 49) on the Step Calibration window. The correction value result will be
reflected in the
Step
field (Refer to Fig 49). The same step value will also be displayed in the
Steps
field on the
Quick
Access Toolbar
.
SETTING PRINT PARAMETERS
Using the printer manager, you can manually change print preferences as per the printing requirements such as print
origin, printing speed, no of steps, and more as shown below:
Fig 50: Setting Printing Parameters
The description of printing parameters is given as follows:
•
Origin X
: Directly enter the print origin value.
•
Steps
: Remove step size errors in the current print job by specifying number of steps.
•
Pass
: Choose the number of passes with which the print job should be printed. Increasing the number of
passes improves the print quality but at the cost of printing time.
•
Speed
: Choose the printing speed like High Speed, Medium, and Low.
•
Medium Speed
: Set the Y printing speed viz. Standard Speed and Low.
ADDING JOBS
There are two ways to add jobs in the Job List area viz. the
Add Job button and right click on the Job List area. Let’s
explain both the ways one by one.
Follow these steps to add jobs in the Job List area:
Step 1
:
Click
on the
Add Job
button on the
Quick Access Toolbar
, as shown below:
Fig 51: Clicking on the Add Job Button
The
Open
window appears on the screen.
Step 2
:
Navigate
to the location where the image file
with extension “
.prt
” and “
.prn
”
is stored (Refer to Fig 52).
