Colop digital e-mark create Скачать руководство пользователя страница 58

Страница: 58 / 60

e-mark create marking deviceChapter 7 Shutdown and disposal

CODI Standard 1.0

58/60

Operating and Maintenance Manual

HUTDOWN AND DISPOSAL

This chapter contains information about discontinuing use and disposal of the product at the end of its service life.

Principle:

Before disposing of product parts, check to see whether they can be recycled. Send away as much as possible for

recycling. Negligent or improper disposal can result in unforeseeable consequences. Dispose of product materials

and components in a manner that is verifiably compatible for mankind, the natural world and the environment. Comply

with details provided by the manufacturer and with corresponding legislation and regulations.

NOTICE

Packaging materials (paper, plastic) must be disposed of separately. Dispose of

components of the device in accordance with legislative stipulations. Dispose of

materials separately and send as much as possible away for recycling.

Electrical components of the product must be sent for recycling as waste of electrical

or electronic equipment. Dispose of batteries in accordance with legislative stipulations.

NOTICE

The electrical components of the product must be sent for recycling as waste of

electrical or electronic equipment.

Steps when shutting down:

The product has to be dismantled into individual parts as far as possible. These have to be disposed of separately.

The battery has to be removed without destroying it:

1. Take out the battery and remove the covers

Fig. 53: Remove covers

Содержание digital e-mark create





























































Результаты поиска

Содержание digital e-mark create

Отзывы:

Похожие инструкции для digital e-mark create

Бренды по названию

Популярные бренды

Colop digital e-mark create, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание digital e-mark create

Отзывы:

Похожие инструкции для digital e-mark create

Бренды по названию

Популярные бренды