_____________________________________________________________________________
Cole-Parmer CLW-108i & CLW-128i Washers
29
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
ACTION
Coarse filter clogged.
Clean as required.
Outlet pump fins clogged.
Clean as required.
Drainage hose is kinked,
folded, out-of-saddle, or
extended too long.
Correct as required. See page
11 for drain connection
requirements.
WATER REMAINS
IN WASHER AFTER
USE, OR EXCESSIVE
WATER IN SUMP AREA.
Drainage hose is
clogged.
Clean as required.
WASHER CYCLES
TAKE TOO LONG TO
COMPLETE.
Tap water not hot
enough.
Check tap water temperature.
Colder temperatures prolong
cycle time.
Power problem.
Check breaker.
Door not completely
latched.
Push the door
firmly
to engage
the latch.
Washer is in Delay-Start
mode.
Ensure the
START-DELAY
indicator is extinguished. See
page 16 for more information.
WASHER WILL
NOT START, OR
CANNOT SELECT AND
BEGIN A CYCLE.
The Cycle Lock function
is enabled.
De-activate the Cycle Lock as
described on page 25.
