_____________________________________________________________________________
Cole-Parmer CLW-108i & CLW-128i Washers
31
PROBLEM
POSSIBLE CAUSE
ACTION
Mineral-rich water.
Check water hardness.
MARKS OR
DISCOLORATION.
Wrong type of detergent.
Use correct amount and type of
detergent.
YELLOWISH MARKS.
Iron-rich water.
Temporary Solution:
Pour
approximately 0.5 oz. (15 ml) of
citric acid into the Pre-Wash
Detergent Compartment and run
the HEAVY program.
Permanent Solution:
Install an iron removal system in
the water supply.
SILICON FILM.
Softened hard water.
Add additional detergent to the
wash. To improve rinsing, do not
load the machine to full capacity.
Difficult-to-dry material.
Try activating the heated rinse
(HR) option on the control panel.
A hotter rinse can facilitate
subsequent drying.
Items incorrectly loaded.
Load items with concave side
down.
GLASSWARE DOES
NOT DRY.
Standing water in
washer.
Check drain system and outlet
pump.