_____________________________________________________________________________
Cole-Parmer CLW-108i & CLW-128i Washers
13
8)
ADJUST THE LEVELING LEGS
On
Undercounter
units, leg height may be adjusted as follows:
Use a 5/8" (16 mm) wrench to adjust leveling legs to the required
height and to level the unit. Any inclination must be
≤
2°. Use the
locking nut to lock your adjustments:
If rear-leg height adjustment is necessary, temporarily remove the
washer from final position to adjust the rear leg.
9)
SECURE THE WASHER IN ITS FINAL POSITION
Undercounter Units
:
To prevent forward
tilting when downward
force is applied to the
open door or when
heavily loaded baskets
are pulled outward, use
screws to fasten the washer to the cabinet. Using the supplied
screws, plastic spacers, and rubber cosmetic plugs, secure the
washer to the cabinet using alternative “A” or “B” (one screw on
each side) as shown here.
Freestanding / Mobile Units
: If your application creates the
potential for forward tilting, use the supplied
TIP GUARDS
or
your own fashioned brackets to secure the washer’s rear castors
to the wall or floor. Typical installations are shown here:
LOCKING NUT
FOOT / SLIDER
H E X N U T
L O C K
W A S H E R
F L A T
W A S H E R
