Cold Jet AERO2 PLT 60, Руководство оператора

Страница: 31 / 56

25
Follow the instructions below to start blasting dry ice particles:
1. On the applicator, press the air/ice control (II) to activate (green light ON).
2.
It is recommended to start blasting next to the target (but in a safe place) and move onto the
target.
3. Move the nozzle back and forth, keeping it perpendicular to the surface being cleaned.
4. Monitor the hopper level and reload dry ice pellets as needed:
a. On the applicator, the status light will be solid red when the hopper is full and start
flashing when the hopper level is low to empty.
b. On the control panel, the hopper level is indicated by the color of the hopper icon.
Green is full, yellow is half-full and red is empty.
5. Adjust settings or select a recipe:
a. To adjust the settings:
i. Use the rotary encoder dial to adjust the feed rate and blast pressure.
b. To select a recipe:
i. Use the rotary encoder dial to navigate to the Settings screen, then to the
Recipe screen.
ii. Use rotary encoder dial to select the recipe menu and adjust it to the desired
recipe numbered 1-9 (see “Recipes” on page 29).