Cold Jet AERO2 PLT 60, Руководство оператора

Страница: 20 / 56

14
Control Panel and HMI Screens
The PLT 60 uses a rotary encoder dial that allows the operator to navigate, select and adjust settings
on the control panel screen. Navigate between options by pressing the rotary encoder and turning
the rotary encoder dial left or right; this will highlight the option in blue. Once the desired option is
highlighted, simply press the dial again to select it; this will highlight the option in green. With the
option selected (green), turn the rotary encoder dial left or right to adjust the setting then press
again to accept.
Some options can be adjusted directly from the home screen while other options can be found on
other screens. To access these other screens using the rotary encoder dial, navigate to the settings
screen and press to select. Continue to navigate through the screens (i.e. recipe, status, applicator,
advanced, reset, settings) and adjust the settings as needed by turning and pressing the rotary
encoder dial.
When not being used, the screen on the control panel will display a screen saver with feed rate, air
pressure, blast pressure and hopper level.
Figure 1: Control Panel and Rotary Encoder Dial
There are 2 screen states for the PLT 60. A blue screen (home screen) which is the system operating
and settings screen. A black screen indicates that the PLT 60 is in the advanced settings or the
recipe screen. Changes can be made in each screen.