English
25
10.7 How to extract the colour assembly.
1-
Remove “D” screws on the connector labelled “COLOUR CHANGER” and gently remove the “E”connector.
2.
Remove the fixed screws of the colour changer assembly and gently extract it. Now it is possible to inspect, clean and replace the
filters.
WARNING!
If it has not been done before, extract the gobos assembly now or it will not be possible to proceed otherwise; refer to pre-
vious section
10.6 How to replace gobos on gobos 2 wheel.
1.
Facing the front side of the wheel, gently hold the gobo you want to replace with thumb and finger, then lift it up pushing it with your
finger, then remove it.
2.
Insert the new gobos making it slip under the spring until it locks; refer to the nick in the spring to keep a useful point of reference to
orient the gobos.
