Coemar Infinity Spot L, Инструкция по эксплуатации

Страница: 29 / 30

29
English
15. Frequently asked questions
Domanda Causa Possibile Possibile Soulzione
The projector is completely still.
Projector not powered up:.
The circuit breaker is switched off.
The protection fuse is blown.
Check that the mains power cable is
connected to power.
Set the circuit breaker to ON.
Disconnect the projector and
replace the fuse.
The projector resets correctly,
but either does not respond, or
responds incorrectly, to DMX
signal.
Incorrect DMX address.
Incorrect signal connection.
Inspect the signal cable, rectify any
incorrect wiring, repair or replace
any damaged cables or connectors.
Check the DMX address
The lamp functions intermittently or
does not turn on at all.
The projector is too hot.
Let the fixture cool down. Check
that the air vents above the cooling
fans are not obstructed and that the
fans are working correctly.
Ensure that the ambient emperature
is below 35°C
Projection brightness appears
reduced
Lamp may be exhausted or not
properly aligned to optical path.
Replace the lamp if exhausted.
Replace the lamp if exhausted.
Align the lamp to optical path.
Information on disposal of the equipment
The equipment at the end of its useful life must be disposed of at an appropriate recycling center for
waste electrical and electronic equipment. The treatment and disposal of environmentally friendly, helps
prevent potential negative environmental and health and promote the reuse and / or recycling of
materials making up the equipment. Illegal disposal by the user includes the application of administrative
sanctions provided by law.