Coemar Infinity Spot L, Инструкция по эксплуатации

Страница: 9 / 30

9
English
For installations on a reticular structure, we recommend using specific “C” hooks, suitable for supporting the weight.
Normally, the “C” hooks are tightened in the central hole of the cam-lock brackets, as shown in the picture below.
WARNING !
Always make sure that both the structure and the fixing devices (screws, clamps etc.)
are suitable for holding the weight of the unit.
The structure must also be sufficiently rigid so as not to move or shake whilst the Infinity Spot L projector moves du-
ring its operation. Make sure that the supporting structure is not subject to torsion.
Do not install the projector in locations readily accessible by unauthorised or untrained personnel who is not aware of
these safety instructions.
4.2 Safety connection
If the Infinity Spot L
is fixed to a structure, the use of a safety chain is recommended in order to meet the current rele-
vant safety standards. The safety chain must pass through the holes “A” and then fixed to the structure itself.
If using steel wires or chains which have not been manufactured by Coemar, make sure that they are suitable for hol-
ding the weight of the unit.
A