Coemar Infinity Spot L, Инструкция по эксплуатации

Страница: 21 / 30

21
English
11. Operating on internal groups
The fixture allows the extraction of both gobos and colour changer assemblies in order to facilitate inspection, gobos
replacing and clearing of colour filters and lenses.
WARNING!
The following procedures should be undertaken by qualified and experienced technical personnel.
Handle with extreme care!
Always disconnect al cables before proceeding and ensure that the unit is sufficiently cool.
11.1 How to open the projector
Using an appropriate screwdriver, remove screws “A” from the upper housing and remove this. In order to identify
the upper housing to be removed, position the unit so that the printing on the lamp holder group can be read (the
printing must not upside down). Once this operation has been carried out, block the movement of the body through
the specific device and proceed with the removal of the upper housing.
11.2 How to extract the gobos and colour changer assembly.
1.
Remove “B” screws of the connectors labeled “gobos” and “color changer” and gently remove the connector.
2. Remove “C” and “D” screws of the two assembly, note that the “D” screws are placed in the inside.
4. Now, gently extract the gobos assembly.
5. Finally extract the color changer assembly.
A
A
B
C
D
C
D
B