2.
Lifting it from its seat, after which you can remove the gobo.
3.
Place the new gobo into position and reverse the above procedure, ensuring that
the spring sits firmly back in its proper place.
10.5 Replacing gobos on gobo wheel 2
1.
Use a screwdriver to loosen the screw
“D”
.
2.
Sliding the lever towards the top.
On the opposite side, yo will note an opening as shown in figure.
At this point proceed as per previous section (
Replacing gobos on gobo wheel 1
).
Ultimate the gobos substitution sliding the lever in the opposite direction in order to close up the opening and retighening screw
“D”
.
21
English
