10.3. Access to the gobos wheels
To replace gobos, proceed as follows:
1.
Open up the projector housing as discussed in section
10.2. Opening up the projector housing.
2.
Loosen the thumbscrews
“B”
as shown in this diagram.
3.
Remove the gobo group as shown in the diagram. You will the
gobo wheels in a position where access to the individual gobos is
quite straightforward.
Proceed with the changing of the individual gobos as required.
10.4 Replacing gobos on gobo wheel 1
1.
Use a tool such as a screwdriver as a lever on the spring
“C”
on the
inside of the gobo wheel.
20
English
