The control panel of the
ColourCyc 250 LX
is fitted with a further 6 additional dip-switches to those described in section 13. These
are used to alter several parameters of the unit:
Testing the projector
Setting the
test
dip-switch to the
ON
position will cause the
ColourCyc 250 LX
to carry out a self-test function.
Fans
Setting the
fan ON
dip-switch to the
ON
position will cause the fans to remain on at all times the projector is powered up. In the
OFF
position, the fans will operate only when the lamp is switched on.
Lamp control
With the
lamp ON
dip-switch in the
ON
position, the lamp will remain on at all times the projector is powered up. In the
OFF
position, the lamp will be controlled via DMX signal.
Motor calibration
The
motor calibration
dip-switch in the
ON
position will allow for motor offsets to be recalibrated.
For further information about this, read section
24. “Electronic motor alignment”
.
Inhibiting strobe and colour changes
The
shutter/strobe inhibit
dip-switch will overide when in the
ON
position DMX channels 2 and 4. (which control colour chan-
ging and strobe effects).
Dr 1
dialog
The
DR1 remote
dip-switch, when switched to the
ON
position, allows the dip-switch settings to be by-passed for communica-
tion between the
ColourCyc 250 LX
and the
dr 1
.
For further information, refer to section
15. “Remote operation using the dr1”
.
ON
ON
DR1
remote
ON
ON
shutter/
strobe inhibit
ON
ON
motor
calibration
ON
ON
lamp ON
ON
ON
fan ON
ON
ON
test
14. Dip-switch functions
17
English
