Coemar ColourCyc 250LX, Инструкция по эксплуатации

Страница: 15 / 30

Multiple ColourCyc 250 LX can be operated in the absence of control signal by executing internally stored, pre-recorded pro-
grams.
Projectors correctly connected together may operate in synchronised mode, the
ColourCyc 250 LX receiving signal being deno-
minated as “ slave ” units and those generating control signal designated as “ master ” units.
To activate this automated function, projectors must be connected together as described in the section entitled 8.3. “Synchronising
multiple
ColourCyc 250 LX fixtures without using DMX512”; No signal cables should be connected to the external XLR3 sockets.
Power up the projector and use the dip-switches to adjust to the correct settings.
13.1 “Masters” units
ColourCyc 250 LX may operate automatically with output in the form of pre-recorded programs, as described in section “ 8.3.
Synchronising multiple ColourCyc 250 LX fixtures without using DMX512” Only one unit may be designated as
“master” .
Selecting a master unit is simply a matter of convenience and accessibility to the dip-switches:
Activating “auto” mode
Set to ON the dip-switch named built in program control . From this moment, the dip-switches 1 to 9 may be used to adjust
the various parameters for automated colour changes: program selection, fade times and speed.
Selecting automated colour change programs
.
Dip-switches from PR1 to PR4 (program 1 to program 4), when switched to the ON position, activate preset colour change pro-
grams.
The 4 in-built programs have the following features:
Program 1: all colours, with the exception of open white, in a smooth, slow crossfade sequence
Program 2: all colours in a smooth, slow crossfade sequence
Program 3: all colours, with the exception of open white, in sequence.
Program 4: all colours in sequence.
Selecting the hold time
Dip-switches T1 and T2 allow for one of 4 hold times for the various colours
Selecting the fade speed
Dip-switches SP1 and SP2 allow for one of 4 fade times to be selected.
S P 1 S P 2 Speed
off off fast
on off medium
off on medium slow
on on slow
T 1 T 2 t (sec.)
off off 3
on off 1 0
off on 3 0
on on 6 0
Important note:
Only one program at a time may be selected.
ON
ON - built in program control
PR 1 PR 2 PR 3 PR 4 T 1 T 2 SP 1 SP2 all PR
built in program and speed
13. Operating multiple ColourCyc 250 LX in the absence of DMX 512 signal
15
English